How to reset VDI password, VMP and VDC?

Tanx Wang Lv1Posted 14 Jan 2019 14:23

hello team,
could you share with me how I can reset VMP and VDC password?
Thanks in advance.

CTI Jimy has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Hi,

For VMP, you may reset the password by using USB.

Restore password with USB Drive:
1. Create an empty txt file named reset-password.txt or Copy the reset-password.txt file to the root directory of U Disk;
2. Insert the U disk, restart the device;
3. When the device can normally log on the WebUI, pull out the U disk;
4. See the results of the U disk file reset-password.log,If the recovery is successful, record the restored console password in this file, otherwise the log is recorded the recovery failure information.

Notes:
1.This TXT file can be directly on the windows system to establish a empty TXT file, the file name to reset-password.txt;
2.The txt file must be in the root directory of the U disk;
3.U disk can be single or multiple partitions. A single partition of the U disk format must be FAT32; multi partition U disk must put the txt file in the first partition, and the first partition format must be FAT32.

As for the VDC, the password reset can only be done by technical personnel.
Should you require to reset the VDC password, kindly drop an email to tech.support@sangfor.com
Is this answer helpful?
CTI Jimy Lv2Posted 17 Jan 2019 17:35
  
Hi,

For VMP, you may reset the password by using USB.

Restore password with USB Drive:
1. Create an empty txt file named reset-password.txt or Copy the reset-password.txt file to the root directory of U Disk;
2. Insert the U disk, restart the device;
3. When the device can normally log on the WebUI, pull out the U disk;
4. See the results of the U disk file reset-password.log,If the recovery is successful, record the restored console password in this file, otherwise the log is recorded the recovery failure information.

Notes:
1.This TXT file can be directly on the windows system to establish a empty TXT file, the file name to reset-password.txt;
2.The txt file must be in the root directory of the U disk;
3.U disk can be single or multiple partitions. A single partition of the U disk format must be FAT32; multi partition U disk must put the txt file in the first partition, and the first partition format must be FAT32.

As for the VDC, the password reset can only be done by technical personnel.
Should you require to reset the VDC password, kindly drop an email to tech.support@sangfor.com
hendra Lv2Posted 18 Jan 2020 16:55
  
thanks for share

I Can Help:

Change

Board Leaders