VLAN configuration not working

S.Pont Max Posted 08 Jun 2019 07:22

I've Sangfor NGAF45, i've a problem with vlan configuration.
The actual situation is:
ETH1 - LAN interface IP: 192.168.1.1/24
ETH2 - WAN Interface

one VLAN interface:
veth.2 - IP: 192.168.2.1/24

Routing between lan and wan working ok
i've no set a sub-interface.
The problem is that VLAN not working, if i set manually ip addresses of the vlan on one PC i can ping the other pc's on vlan but not gateway (192.168.2.1) and i cannot go outside on internet.
So... vlan seems to be created ok but i cannot ping gateway and no navigation.
What is the correct procedure to set a vlan that can go on internet and can inter-communicate with the IP class 192.168.1.0 set on ETH1 physical interface?
Thanks

By solving this question, you may help 147 user(s).

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

sami18ahmed Lv1Posted 10 Jun 2019 09:55
  
To goto internet you need you setup SNAT.

I Can Help:

Change

Moderator on This Board

0
8
0

Started Topics

Followers

Follow

Board Leaders